Code: G1010

Gemini Double D Fixed Grip Head & Grip Kit Yellow

£3.00
  • 1 in stock

System 100+ DD Fixed Grip Heads (4)

The Double D fixed grip wires are made from a relatively thick, 1.4mm strong stainless steel wire that does not easily give or bend. This variation of the Fixed Grip heads should only be used in the strongest of conditions - if you can't hold with this one, it is probably time to pack up and go home!

Double D Fixed Grip Kit Contents: 4 x Double D Fixed Grip Heads, 16 x Double D Fixed Grip Wires, 4 x Double D PVC Sleeve (enough to make 4 DD fixed grip heads).

The Fixed grip wires give the maximum amount of grip because of the distance of the grip wire from the mass of the sinker, and are consequently least suitable for casting. They are therefore mainly used from piers and boats where the tidal flow is strong, but because of the height of the fisherman from the sea bed, they can be virtually lifted out of position and are not required to be dragged across a large expanse of obstacle strewn shallow water upon retrieval. However, given the right conditions they are suitable for casting.

The fixed grip wires are straight when you get them and can be bent to the required shape. We consider the curved shape illustrated on this page to be the optimum for gripping power, but the choice is yours!

Also, the wires can be cut shorter and/or the sleeving removed to alter the dynamics of the sinker as required.

The Double D fixed grip wires are made from a relatively thick, 1.4mm strong stainless steel wire that does not easily give or bend. This variation of the Fixed Grip heads should only be used in the strongest of conditions - if you can't hold with this one, it is probably time to pack up and go home!

Read More